› Powder

PFS Product Number	Description / Application	Recommended Use
2) PFS-POLYFAST CUT	White powder, odorless, pH 9. Formulated to promote good deburring. An excellent cleaner and corrosion inhibitor for all metals.	Use PFS-POLYFAST CUT from 2 to 4 oz per gal of water in a flow thru or barrel system.
3) PFS-EHD-CUT	White abrasive powder, odorless, pH 9. Designed to promote deburring on all metals, reducing deburring cycles, and leaving a clean, deburred part.	Use PFS-EHD CUT from 2 to 4 oz per gal of water in a flow thru or barrel system.
4) PFS-CUT AND COLOR	White powder, odorless, pH 9. Contains mixture of fine abrasives to produce low microinch finishes on all metals.	Use PFS-CUT AND COLOR from 4 to 8 oz per gal of water in a flow thru or barrel system.
5) PFS-129 CLEANER	White powder, odorless, pH 12. An aggressive high alkaline cleaner for ferrous metals, removing heavy oils, and leaving parts clean and protected.	Use PFS-129 CLEANER from 2 to 8 oz per gal of water in a flow thru or barrel system.
6) PFS-164 CLEANER	White powder, odorless, pH 11. Formulated with alkaline emulsifiers to effectively remove heavy oils from all metal parts.	Use PFS-164 CLEANER from 2 to 4 oz per gal of water in a flow thru or barrel system.
7) PFS-461-B BURNISH	White fluffy powder, odorless, pH 9. An all-purpose burnishing compound, designed to develop lustrous colors on all metals.	Use PFS-461B BURNISH from 2 to 4 oz per gal of water in a flow thru or barrel system.
8) PFS- 10 RUST INHIBIT	White powder, odorless, pH 8. Dissolve in water to be used as a final dip or rinse to prevent rusting on ferrous metals.	Use PFS-10 RUST INHIBITOR from 2 to 12 oz per gal of water in a flow thru or barrel system.

For any further questions about Recommended Use please contact us