PFS provides an extensive variety of compounds that are environmentally safe and biodegradable. Our compounds provide excellent detergency and cleaning, inhibtion of parts, soil suspension to prevent deposits, and controlled foaming. PFS compounds can be used in vibratory equipment as well as centrifugal barrels and discs and conventional tumbling barrels. PFS maintains a complete laboratory for analysis and sample processing.

Deburring Compounds
Formulated to clean the media and parts, suspend soils, enhance deburring, inhibit parts, prevent deposits and foam.

• PFS 707 - Deburring of non-ferrous alloys and composites, excellent inhibitor, suspends soils, prevents deposits of solution lines. Low foaming and enhances deburring.
  
  
• PFS 5125 - Excellent cleaner of all metals, some inhibiting, reduces residue of plastic media, prevents deposits on parts. Low foaming.
  
  
• PFS 1002 - Non-chelating formula for deburring all non-ferous metals. Prevents foam build-up, cleans soils, and prevents deposits on parts.
  
  

Inhibiting Compounds
Formulated to inhibit parts, enhance, and prepare surface for subsequent applications.

• PFS 727-R - Inhibition of cast iron, steel, and ferrous alloys. Enhances plating, brazing, welding, painting, and other subsequent applications.
  
  
• PFS 737 - Inhibiting and quenching aluminum, zinc, magnesium, copper, and their alloys. Inhibits against tarnishing stains, and corrosion.
  
  
• PFS 10 - Inhibiting cast iron, steel, and ferrous alloys. Final daip after deburring or finishing. Imparts microscopic film on surface.
  
  

Cleaning Compounds
Formulated to remove oil, grease, dirt, and other contaminates. Promotes media cutting and bright parts.

• PFS 727 - Excellent cleaner and inhibitor on ferrous, powdered, and cast iron alloys. Suspends particles, and prevents deposits.
  
  
• PFS 757 - Replacement for cleaning and degreasing solvents. Excellent emulsification and removal of oils leaving parts clean and inhibited.
  
  
• PFS 16 - Spray wash concentrate for steel, aluminum, and other alloys. Excellent inhibitor, suspends particles, prevents deposits, removes dirt and oil.
  
  
• PFS 129 Cleaner - Highly alkaline cleaner provides emulsification and removal of oils. Excellent inhibitor, suspends particles, prevents deposits, and leaves parts bright.
  
  
• PFS 164 Cleaner - Akaline cleaner provides excellent emulsification and removal of oils. Good inhibitor, suspends particles, prevents deposits, and leaves parts bright.
  
  

Burnishing Compounds
Formulated to provide high color on a variety of alloys using porcelain or steel media.

• PFS 747 - Imparts highly reflective colors on all ferrous and non-ferrous metals. Excellent brightener and inhibitor for steel media.
  
  
• PFS 743 - Bleaches metals to their whitest brightest color. Low foaming. Excellent inhibitor for steel media.
  
  
• PFS 5140 - High viscosity soap to reduce impingement and provide low micro-finishining of all alloys and composites.
  
  
• PFS 461 - Cleaning and burnishing powder hich provides excellent color on ferrous metals, especially stainless.
  
  
• PFS 1001 - Non-chelating compound for polishing and deburring non-ferrous metals. Provides excellent cleaning and lubricity for polishing.
  
  

Descaling and Brightening Compounds
Formulated to remove heavy rust, heat scale, and other discolorations. Mild etching of non-ferrous alloys.

• PFS Descaler - Acidic compound for removing heavy rust, heat scale, and other discolorations. Excellent sudsing to suspend particles, and eliminate smut.
  
  

Abrasive Compounds
Formulated to provide rapid cutting of heavy burrs, radiusing, and blending of surface edges.

• PFS Cut & Color - Fine abrasive provides food cutting of media or part-on-part deburring. Imparts a bright matte finish on most metals.
  
  
• PFS EHD Cut - Blend of coarse abrasives to provide rapid cut for heavy burrs or edge radius. Imparts dull matte finish.
  
  

For assistance selecting the best compounds for your finishing setup, contact PFS. We customize unique solutions on a client by client, part by part basis to ensure the best results and most ecomomic decisions.

© 2010 Professional Finishing Systems Inc. All rights reserved. This literature is for eductaional purposes only! It is not meant to be sold or reproduced for commercial purposes unless permission is granted directly by Professional Finishing Systems Inc.