Used Deburring Machines

Learning Resources

PFS Events

WESTEC trade show

Used Deburring Machines

We sell reconditioned machines that are in excellent shape. We personally make sure all of the liners and bearings are in good working order!

Bowls

Tumbling Barrels

Tubs

Filtration

Centrifugal

Page 1 of 2

Last »

Sort By:

	CB-450 Centrifugal barrel finishing is approximately 10 times faster than vibratory finishing. PFS's CB-450 is of heavy construction to withstand the higher "G" forces that are generated. Manufacturer: PFS

	Sweco FM-1.2C Vibratory Bowl (used) 1.2 cubic foot capacity, Polyurethane bowl, Curved wall great for steel media applications, Maximum straight part length: 9�, Machine height: 42�, Bowl diameter: 24�, Channel width: 7�, Channel Depth: 7�, 1/3 hp motor, 220 volt only - 3 phase, Approximate

	Burr King M25 Vibratory Tub (used) 2.1 cubic foot operating capacity, New polyurethane liner, New bearings, New v-belt, New electrical box, New paint, On / off switch included, 110 volt - 3/4 h.p. motor, Machine dimensions: 29"L X 33"W X 41"T, Tub dimensions: 20"L X 15"W X 16"D, Approximat

	Centrifugal Disc Finisher DF-12 (used) 1/2 cubic ft. capacity, New Bearings, New Seals, New drive Belt, New Paint, Bowl Diameter 12", Machine Dimensions 30L" X 14W" X 20H", 1 hp motor, 110 volt

	Almco-OR 5 (used) 5 cu. ft. capacity, 3 hp motor, 230/480 volt, new bearings, new belts, bowl diameter 40", bowl depth 12", machine height 41", machine width 45"

	Roto-Finish Multi-Pass Finishing Machine (used) Multi-Pass Finishing Machine, Internal Media Separation, New paint, New drains, Channel width 6.5", Bowl diameter 80", Machine height 53", 240/480 volt, 10 hp motor Manufacturer: Roto-Finish

	Roto-Max Centrifugal Disc High Energy Finishing Machine (used) 15 times faster than traditional vibratory machines, NEMA 12 control panel, 2 Cubic foot capacity, Ribbed Polyurethane lined bowl, Base dimensions: 41"L X 39"W X 30"H, Process bowl height: 47", Process bowl diameter:25.5" Manufacturer: Roto-Finish

	Roto-Finish ST-4B-C (used) 3.5 cubic feet operating capacity, Curved wall great for steel media applications, New paint, New belt, Polyurethane lined bowl, 3 drains, 220volts, 2 h.p. TEFC Drive motor, On/off box, Channel width 8", Channel depth 14", Bowl diameter 44", Machine heigh Manufacturer: Roto-Finish

	Roto-Finish ST-1 (refurbished) 1 Cubic Foot Capacity, Steel Tub with New Ribbed, Polyurethane Lining, New Bearings, New Springs, New V-belt, Built in Drain, 0-1 Hour Timer, Parts - Media Separation, Steel Ball Burnishing Capability, Bowl Diameter 21.5", Channel Width 5.5", 110 Volt, 1/ Manufacturer: Roto-Finish

	VL Rampe Oval Vibratory Finisher (used) 15 cubic foot capacity with curved wall and internal separation, Great for steel media applications, Oval bowl dimensions 50" X 103", Process channel width 10.5", Machine height 55", Screen deck height 44", Manual lever gate, Load chute, New idler sheave,

Page 1 of 2

Last »

New Deburring Machines

Used Deburring Machines

Equipment Accessories

Deburring Compounds

Deburring Media

Provided Services

Learning Resources

PFS Events

Used Deburring Machines